Not affiliated with or endorsed by the FCC, NCVEC, ARRL or any VEC. Questions are the NCVEC pools word for word (public domain); explanations are our own. Exam rules and fees can change: check with your VE team.
T5D: Ohm’s Law; Series and parallel circuits
Group T5D of the Technician pool (2026–2030) has 14 active questions. One of them is on every Technician exam. Each is shown word for word; open it to see the correct answer and our explanation.
T5D01
What formula is used to calculate current in a circuit?
A I = E x R
B I = E / R
C I = E² x R
D I = E² / R
Show the answer and explanation
Correct answer: B. I = E / R
Why B is right. B. I = E / R.
Current grows when you push harder with more voltage and shrinks when resistance is higher. Dividing voltage by resistance captures both effects. Here E is voltage in volts, R is resistance in ohms, and I is current in amperes.
Why not A? Multiplying by R would make current rise as resistance rises, which is backward.
T5D02
What formula is used to calculate voltage in a circuit?
A E = I x R
B E = I / R
C E = I² x R
D E = I² / R
Show the answer and explanation
Correct answer: A. E = I x R
Why A is right. A. E = I x R.
Voltage across a resistance equals the current through it times the resistance. More current or more resistance means more voltage. E is in volts, I in amperes, R in ohms.
Why not B? E = I / R would mean more resistance gives less voltage at the same current, which is backward.
T5D03
What formula is used to calculate resistance in a circuit?
A R = E x I
B R = E / I
C R = E + I
D R = E - I
Show the answer and explanation
Correct answer: B. R = E / I
Why B is right. B. R = E / I.
Resistance is how many volts it takes to push each ampere through a circuit. So divide voltage by current. If 10 volts drives 2 amperes, resistance is 5 ohms.
Why not A? Multiplying voltage by current gives power, not resistance.
T5D04
What is the resistance of a circuit in which a current of 3 amperes flows when connected to 90 volts?
A 3 ohms
B 30 ohms
C 1/30 ohm
D 270 ohms
Show the answer and explanation
Correct answer: B. 30 ohms
Why B is right. B. 30 ohms.
Divide the voltage by the current to find resistance.
R = E / I
R = 90 V / 3 A = 30 ohms
= 30 ohms
Why not D? 270 ohms multiplies volts by amperes, which is power, not resistance.
T5D05
What is the resistance of a circuit for which the applied voltage is 12 volts and the current flow is 1.5 amperes?
A 18 ohms
B 0.125 ohms
C 8 ohms
D 13.5 ohms
Show the answer and explanation
Correct answer: C. 8 ohms
Why C is right. C. 8 ohms.
Divide the voltage by the current to find resistance.
R = E / I
R = 12 V / 1.5 A = 8 ohms
= 8 ohms
Why not B? 0.125 ohms divides current by voltage, which is upside down.
T5D06
What is the resistance of a circuit that draws 4 amperes from a 12-volt source?
A 3 ohms
B 16 ohms
C 48 ohms
D 8 ohms
Show the answer and explanation
Correct answer: A. 3 ohms
Why A is right. A. 3 ohms.
Divide the voltage by the current to find resistance.
R = E / I
R = 12 V / 4 A = 3 ohms
= 3 ohms
Why not C? 48 ohms multiplies instead of dividing.
T5D07
What is the current in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms?
A 9600 amperes
B 200 amperes
C 0.667 amperes
D 1.5 amperes
Show the answer and explanation
Correct answer: D. 1.5 amperes
Why D is right. D. 1.5 amperes.
Divide the voltage by the resistance to find current.
I = E / R
I = 120 V / 80 ohms = 1.5 A
= 1.5 amperes
Why not C? 0.667 amperes divides resistance by voltage, which is upside down.
T5D08
What is the current through a 100-ohm resistor connected across 200 volts?
A 20,000 amperes
B 0.5 amperes
C 2 amperes
D 100 amperes
Show the answer and explanation
Correct answer: C. 2 amperes
Why C is right. C. 2 amperes.
Divide the voltage by the resistance to find current.
I = E / R
I = 200 V / 100 ohms = 2 A
= 2 amperes
Why not B? 0.5 amperes divides resistance by voltage, which is upside down.
T5D09
What is the current through a 24-ohm resistor connected across 240 volts?
A 2400 amperes
B 0.1 amperes
C 10 amperes
D 5760 amperes
Show the answer and explanation
Correct answer: C. 10 amperes
Why C is right. C. 10 amperes.
Divide the voltage by the resistance to find current.
I = E / R
I = 240 V / 24 ohms = 10 A
= 10 amperes
Why not D? 5760 amperes multiplies instead of dividing.
T5D10
What is the voltage across a 2-ohm resistor if a current of 0.5 amperes flows through it?
A 1 volt
B 0.25 volts
C 2.5 volts
D 1.5 volts
Show the answer and explanation
Correct answer: A. 1 volt
Why A is right. A. 1 volt.
Multiply the current by the resistance to find the voltage across it.
E = I × R
E = 0.5 A × 2 ohms = 1 V
= 1 volt
Why not B? 0.25 volts divides current by resistance instead of multiplying.
T5D11
What is the voltage across a 10-ohm resistor if a current of 1 ampere flows through it?
A 1 volt
B 10 volts
C 11 volts
D 9 volts
Show the answer and explanation
Correct answer: B. 10 volts
Why B is right. B. 10 volts.
Multiply the current by the resistance to find the voltage across it.
E = I × R
E = 1 A × 10 ohms = 10 V
= 10 volts
Why not C? 11 volts adds the numbers instead of multiplying.
T5D12
What is the voltage across a 10-ohm resistor if a current of 2 amperes flows through it?
A 8 volts
B 0.2 volts
C 12 volts
D 20 volts
Show the answer and explanation
Correct answer: D. 20 volts
Why D is right. D. 20 volts.
Multiply the current by the resistance to find the voltage across it.
E = I × R
E = 2 A × 10 ohms = 20 V
= 20 volts
Why not C? 12 volts adds the numbers instead of multiplying.
T5D13
In which type of circuit is the current always the same through all components?
A Series
B Parallel
C Resonant
D Branch
Show the answer and explanation
Correct answer: A. Series
Why A is right. A. Series.
In a series circuit, parts are connected end to end in a single loop. Current has only one path, so the same current passes through every part.
Why not B? In parallel, current splits among branches, so each part can carry a different current.
Remember: One road, so all traffic passes every stop.
T5D14
In which type of circuit is the voltage always the same across all components?
A Series
B Parallel
C Resonant
D Branch
Show the answer and explanation
Correct answer: B. Parallel
Why B is right. B. Parallel.
In a parallel circuit, every part connects directly across the same two points. Since each part is attached to the same pair of points, each one has the same voltage across it.
Why not A? In series, the voltage divides among the parts, so each can have a different voltage.